The BLACK BULL Racking End Frame Protector A provides protection for vulnerable Racking End Frames from potentially hazardous damage from forklift trucks or other vehicles. These strong adjustable protectors are easily installed and adjusted to your requirements.
- Highly visible.
- Strong effective protection.
- Adjustable to width.
- Easily installed with minimum loss of space.
Applications:
Warehouses, distribution depots, manufacturing units etc.
Specifications:
Dimensions
- Posts: 465mmH x 80 x 80mm Square
- Rails: ‘C’ Profile – 100D x 40W x 3mm Gauge
- Anchor plates: 160D x 140W x 10mm Gauge
- All sets: 465mm High x 160mm Deep
- Set 1 Adjustable Width: 900mm to 1,300mm
- Set 2 Adjustable Width: 1,700mm to 2,100mm
- Set 3 Adjustable Width: 2,300mm to 2,700mm
Material:
- Posts, rails & end plates: Steel
- Securing blocks: Aluminium
Finishes:
- Indoor: Powder Coated Yellow with Black stripes on End plates
- Outdoor: Hot Dip Galvanised & Powder Coated with Black stripes on End plates
Each Set comprises the following:
Set 1 – 900 to 1,300mm
- 1 x Double post on base
- 2 x Rails 900mmL (‘C’ Profile)
- 2 x End Plates
Set 2 – 1,700 to 2,100mm
- 2 x Posts
- 2 x Rails 1,800mL (‘C’ Profile)
- 2 x End Plates
Set 3 – 2,300 to 2,700mm
- 3 x Posts
- 2 x Rails 2,300mmL (‘C’ Profile)
- 2 x End Plates
BLACK BULL Racking End Frame Protectors B are a refinement of our original End Frame Protectors, these new End Frame Protectors are easily installed providing protection to Pallet Racking End Frames from potentially hazardous damage from forklift trucks or other vehicles.
These End Frame Protectors now feature additional protection to the sides of the end frames for additional peace of mind.
- Highly visible.
- Strong effective protection.
- Adjustable widths.
- Easily installed with minimum loss of space.
- TUV-tested according to DGUV 108-007.
Applications:
Warehouses, distribution depots, manufacturing units etc.
Dimensions:
- End frames: 500mmH x 300mmW x 190mmD x 5mm Gauge
- ‘C’ -profile Rails 100mmD x 40mmW x 3mm Gauge
- Set 1 Adjustable Width: 900mm to 1,300mm
- Set 2 Adjustable Width: 1,700mm to 2,100mm
- Set 3 Adjustable Width: 2,300mm to 2,700mm
Material:
- End frames & ‘C’ Rails: Steel
- Securing Blocks: Aluminium
- Securing Bolts required: 12 per unit
Finish: Powder Coated Yellow with Black striping on End Frames (Indoor use)
Version with rollers diverts much of the forces, absorbs collisions, protects the floor and extends the life of the installation.
The BLACK BULL Racking End Frame Protectors Type C are a new addition to the Racking End Frame Protector range incorporating our Polypropylene (PP) lateral rails to replace the steel rails in the Type A & B series.
The use of these rails in conjunction with the steel end supports provides maximum protection for pallet racking end frame uprights while the flexibility of the lateral rails reduces damage to the frames and vehicles. The steel support end sections have extended outer flanges to protect pallet end frame uprights from sideways damage.
Assembly is straightforward and carried out by bolting down one end section in the desired position and inserting the lateral rails, securing and then positioning the second end section at the desired width with the lateral rails positioned, then bolting down the end section and securing the lateral rails.
Components in Set C:
2 x End frames (H x W x D):
400 x 300 x 190mm
Wall thickness: 3mm
Lateral Rails (PP) (H x D x Wall thickness):
74 x 52 x 5mm
Finish:
Support frames powder coated yellow with black striping. PP lateral rails yellow only.
Versions:
Three versions cover end frame widths 900 mm to 2,700mm.
PLEASE NOTE: Lead times are an estimate. Orders placed today are subject to change dependent on material availability, courier workloads and staff situation. West Yorkshire Safety Barriers fully reserve the right to delay delivery due to any direct or indirect impact and without liability to any loss or financial penalty. Please contact us if you need your product for a specific date.
